User`s manual

Chapter 2 Installation 31
1
2
3
3
2
1
Table 2-15: Audio power source setting
*+5 V *7805 5 V
J13
* default setting
Configuration of the audio interface is done entirely via the software
utility. You do not have to set any jumpers. Refer to Chapter 6 for
audio setup details.
2.23 PanelLink (CN22) (optional)
The PCM-9574 optional PanelLink function uses Silicon Image Inc.’s
Universal Transmitter SiI150 chip. It can support 25 ~ 112 MHz clock
speeds, for VGA through to SXGA LCD panels. The 20-pin PanelLink
transmitter connector is Hirose Electric Co., Ltd.’s product no.
DF13A-20DP-1.25V.
2.24 MDC interface (CN 24)
The PCM-9574 provides a MDC (Mobile Daughter Card) interface
for optional MDC software modem card. This option modem card
will be released later.
The CN 24 consists of the 15 x 2 board to board connector.
(AMP C-179397).