User manual

PCM-9363 User Manual 14
2.2.2.14 Power Switch Connector (CN20)
One 2 x 1 pin wafer box (CN20) for power switch. If for ATX using, please remove J3
jumper and connect to power button via CN20.
2.2.2.15 LPT Connector (CN21)
PCM-9363 can support LPT via CN21. LPT (Line Print Terminal) is the original, yet
still common, name of the parallel port interface on IBM PC-compatible computers. It
was designed to operate a text printer that used IBM's 8-bit extended ASCII charac-
ter set.
2.2.2.16 Mini PCIe Connector (CN28,CN29)
PCI Express Mini Card (also known as Mini PCI Express, Mini PCIe, and Mini PCI-E)
is a replacement for the Mini PCI form factor based on PCI Express. It is developed
by the PCI-SIG. The host device supports both PCI Express and USB 2.0 connectiv-
ity, and each card uses whichever the designer feels most appropriate to the task.
PCM-9363 support a Mini PCIe slot.
2.2.2.17 DDRIII DIMM Socket (CN30)
One 204-pin/H6.5 mm DDRIII DIMM socket (CN30) supports DDRIII 800 MHz up to 2
GB for N455, and D525 up to 4 GB.
2.2.2.18 CompactFlash (CN32)
PCM-9363 provides a CompactFlash card type I/II socket.
The CompactFlash card shares a secondary IDE channel which can be enabled/dis-
abled via the BIOS settings.
Compact Flash set as fix master mode.
2.2.2.19 SATA Power (CN36)
SATA Power supports 5 V and 12 V output, 500 mA each.