User`s manual

58 PCM-9550F/FM/L User's Manual
4.2.10 Auto detect hard disk
The IDE HDD AUTO DETECTION utility can automatically detect
the IDE hard disk installed in your system. You can use it to self-
detect and/or correct the hard disk type configuration.
4.2.11 Save & exit setup
If you select this option and press <Enter>, the values entered in
the setup utilities will be recorded in the chipset’s CMOS memory.
The microprocessor will check this every time you turn your
system on, and compare this to what it finds as it checks the
system. This record is required for the system to operate.
4.2.12 Exit without saving
Selecting this option and pressing <Enter> lets you exit the Setup
program without recording any new values or changing old ones.