User manual

ARK-4153 User Manual 38
5.1 Introduction
If you want to completely disassemble the ARK-4153 embedded box computer, fol-
low the step-by-step procedures below. Users should be aware that Advantech Co.,
Ltd. takes no responsibility whatsoever for any problems or damage caused by the
user disassembly of the ARK-4153 embedded box computer. Make sure the power
cord of the ARK-4153 embedded box computer is unplugged before you start disas-
sembly.
1. Unscrew the 6 screws on the top: four each M3, and two each M2, to the sides.
2. Unscrew the 4 x M3 screws on the top cover.