User manual

ARK-4153 User Manual 30
! IRQ Wakeup Events [Press Enter]
This item allows user to control wakeup from which IRQ event.
3.2.7 PnP/PCI Configurations
! PNP OS Installed [No]
This item allows user to determine PNP function install or not.
! Init Display First [Onboard]
This item is setting for start up Video output from Onboard or PCI device.
! Reset Configuration Data [Disabled]
This item allow user to clear any PnP configuration data stored in the BIOS.
! Resources Controlled By [Auto (ESCD)]
– IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-3, 4, 5, 7,
9, 10, 11, 12, 14, and 15.
– Memory Resources
This item allows you respectively assign a memory block from N/A to DC00.
! PCI VGA Palette Snoop [Disabled]
The item is designed to solve problems caused by some non-standard
VGA cards. A built-in VGA system does not need this function.
Note! This “PnP/PCI Configurations” screen is setting up the IRQ and DMA
(both PnP and PCI bus assignments.)