User manual

PCM-3353 User Manual 8
Chapter 2 Installation
2.1 Jumpers
The PCM-3353 has a number of jumpers that allow you to configure your
system to suit your application. The table below lists the functions of the
various jumpers.
2.2 Connectors
Onboard connectors link the PCM-3353 to external devices such as hard
disk drives, a keyboard, or floppy drives. The table below lists the func-
tion of each of the board’s connectors.
Table 2.1: Jumper/Switch Setting:
J3 Clear CMOS
J5 PCI VI/O Power Selector
CN39 COM2 Setting
SW1 CF Master / Slave Selector
Table 2.2: Connector Table:
CN4 TFT LCD I/F
CN5 Inverter Power
CN6 SMBus
CN11 IDE
CN15 USB1/2 / CN17 USB 3/4
CN18 KB/MS
CN19 Print Port
CN20 RS422/485
CN23 ISA -5V & -12V Input
CN26 LAN
CN27 CRT
CN30 COM1/2/3/4
CN32 Reset / Buzzer pin header
CN35 AUDIO-OUT / CN34 AUDIO-IN
CN36 GPIO1 / CN37 GPIO2
CN38 Power Input
CN40 DDR RAM Socket
CN41 CF Socket