User`s manual

CHAPTER 12 SUMMARY OF THE IEEE-488 LIBRARY FUNCTIONS 77
12. SUMMARY OF THE IEEE-488 LIBRARY FUNCTIONS
Routins Offset Parameters Activity
ABORT 9 None Aborts all bus activity by pulsing the IFC
line.
DEVCLR 15 ADDR% Device clear or selective device clear.
DEVICE 57 ADDR%,PORT% Replaces an LPTn: or COMn: port with an
IEEE-488 device.
ENTER 6 ADDR%,D$ Enters data from a device.
ENTERA 51 ADDR%,DATASEG%, Enters a long string from a
LENGTB% device.
EOL 12 ADDR%,OVTEOL%, Sets the terminators of input
OUTEOL$,INEOL%, and output string of a device
INEOLBYTE%
INIT 0 IOPORT%,MYADDR%, Initializes the interface and
SETTING% sets parameters.
LLO 18 None Local Lockout.
LOCAL 21 ADDR% Sets a device to local mode or releases the
REN line.
OUTPUT 3 ADDR%,D$ Outputs data to a device.
OUTPUTA 54 ADDR%,DATASEG%, Outputs a long string of data
LENGTB% to a device.
PPOLL 24 RESPONSE% Parallel Poll.
PPOLLC 27 ADDR%,CONFIG% Parallel Poll Configure.
PPOLLU 30 ADDR% Parallel Poll Unconfigure.
RENOTE 33 ADDR% Sets a device to remote mode and sets the
REN line.
SEND 36 CMD$ Sends the IEEE-488 mnemonics commands
to the bus.