User`s manual

14 PCL-848AB User's Manual
3.4.1. AHORT
Purpose:
This command aborts all activities on the interface bus bys
Offset :
AHORT%=9
Syntax :
CALL AHORT% ---BASIC
CALL AHSOLUTE(AHORT%) ---BASIC Compiler
Parameter:
None.
Bus Activity :
IFC is pulsed for 100 microseconds.
REN is set true
ATN is set false.
Remark :
This command can be called only in system controller mode An error will occur if this
command is called in the nonsystem control mode.