Specifications

18 PCL-846 User's Manual
Operating Environment Selection
Set jumper 15 (JP15) to correspond with your desired software
operating environment. Connect the left two pins of JP15 to operate in
DOS or Windows 3.1 mode, as shown below. Connect the right two
pins to operate in Windows 95 or Windows NT mode .
JP15 JP15
DOS, Windows 3.1 Windows 95, Windows NT
ICOM Utility Setup for Windows 95/98/NT
Environments
This section discusses the ICOM utility software package installation,
configuration and upgrade/ removal procedure for both the Windows
95/98 and NT environments.
.
Utility Installation
Follo w the installa tion pr ocedur e belo w to install the PCL-846 under
W indo ws 95/98/NT:
1. Run
Setup.exe Setup.exe
Setup.exe Setup.exe
Setup.exe on the driver diskette.
2. Select “
Advantech Icom UtilityAdvantech Icom Utility
Advantech Icom UtilityAdvantech Icom Utility
Advantech Icom Utility ” to install and configure the board,
following the on-line instructions.
3. After the Advantech Icom Utility configuration panel pops up,
please refer to the software help file for more details.
4. Following completion of the installation, restart Windows 95.

