Specifications

Chapter 2 Hardware Installation 11
The follo wing e xample sho ws ho w to set the car d base ad dr ess to 2F8.
The switch sum is set to 2F8: 200 + 80 + 40 + 20 + 10 + 8 (HEX).
Note: On the PCL-846, the ad dress line A9 does not a ppear on the
DIP switch, as it is permanently hardwired to hex 200.
Interrupt Level (IRQ) Setting
(S2, JP11, JP12, JP13, JP14)
The card's IRQ mode can be set using S2. Please note that the DIP
switch on S2 labelled MODE 0 is for setting the mode, as shown
below.
Independent IRQ Mode (JP11-JP14)
Shared IRQ Mode
(
default
)
Independent IRQ Mode