User manual

17 Chapter 2
Step 3:Scroll down the List of Devices box to find the device that you
wish to install, then click the Add… button. You will see a Device
Setting dialog box such as the one in Fig. 2-4.
Configuring the Device
Step 4:On the Device Setting dialog box (Fig. 2-4), you can configure the
A/D channels configuration either as 8 Differential or 16 Single-
ended, and specify the D/A voltage reference either as External or
Internal.
Figure 2.4: Device Settings
Step 5:After you have finished configuring the device, click OK and the
device name will appear in the Installed Devices box as seen
below: