User manual

PCL-COMMUNICATION User Manual 40
3. Click the Add Board button to add a board.
4. Choose the Board Type you want to install, and set up the Base
Address, Specify the base address of the first port and subsequent
base address is mapped to continuous COM numbers. For instance,
if the first port is mapped to 300H, then the second port is mapped
to 308H sequentially. Base port Name, Specify the COM number
of the first port and subsequent ports are mapped to continuous
COM numbers. For instance, if the first port is mapped to COM10,
then the second port is mapped to COM11 sequentially. IRQ set-
ting, 3,4,5,6,7,9,10,11,12 or 15 and Vector Address, 000H ~ 3F8H.