User manual

PCL-COMMUNICATION User Manual 22
Figure 2.17: Mode selection for PCL-746+
2.3.5 I/O Address and Interrupt Setup
Next, you will need to select an IRQ (interrupt request) number, and an I/
O base address for the Card. In PCL-746+, PCL-846A/B and PCL-849A/
B/+, you can choose standard mode or enhanced mode. For other cards
such as PCL-740, PCL-741, PCL-743B/S, PCL-745B/S, PCL-849L and
PCL-858A/B, the cards are designed for enhanced mode.
Mode Setup (S5 for PCL-746+, S2 for PCL-846A/B and S1 for PCL-
849A/B/+)
The card base address can be set using the DIP switches on the card. The
DIP switch labeled "MODE 1" will set the card to standard or enhanced
mode, as shown below. You can select standard or enhanced mode in
PCL-846A/B, but PCL-858A/B are designed for enhanced mode.
Figure 2.18: Standard or Enhanced Mode selection for PCL-746+