Specifications
16 PCL-741 User's Manual
6.Carefully grasp the upper edge of the PCL-741 card. Align the
hole in the retaining bracket with the hole on top of the expansion
slot. Align the gold striped edge connector with the expansion slot
socket. Press the board firmly into the socket.
7.Replace the screw in the expansion slot retaining bracket. Replace
anti-vibration card holder.
8.Attach the DB-9 cable to the connector on the bracket.
9.Replace the PCs cover. Connect the cables you removed in step 2.
Turn the computer power on.
The board is now installed in the computer. See Chapter 4 for
information on cabling.