User manual

Reset Protection Fulfills Requirement for Industrial Applications
When the system has undergone a hot reset (i.e. without turning off the
system power), the PCI-1730/1734 can either retain output values of
each channel, or return to its default configuration as open status,
depending on its on-board jumper setting. This function protects the
system from incorrect operations during unexpected system resets.
Plug-and-Play Function
The PCI-1730/1733/1734 is a Plug-and-Play device, which fully
complies with PCI Specification Rev 2.2. During card installation, there
is no need to set jumpers or DIP switches. Instead, all bus-related
configurations such as base I/O address and interrupt are automatically
done by the Plug-and-Play function.
Board ID
The PCI-1730/1733/1734 has a built-in DIP Switch that helps define
each card’s ID when multiple PCI-1730/1733/1734 cards have been
installed on the same PC chassis. The board ID setting function is very
useful when users build their system with multiple PCI-1730/1733/1734
cards. With correct Board ID settings, you can easily identify and access
each card during hardware configuration and software programming.
Note:
For detailed specifications of the PCI-1730/1733/1734, please refer to
Appendix A, Specifications.
4