User manual

Step 5: After you have finished configuring the device, click OK and

the device name will appear in the Installed Devices box as

seen below:

Fig. 2-7 The Device Name appearing on the list of devices box

Note:

As we have noted, the device name “000:<PCI-1730 BoardID=0

I/O=1000H>” begins with a device number “000”, which is specifically

assigned to each card. The device number is passed to the driver to

specify which device you wish to control.

After your card is properly installed and configured, you can click the

Test… button to test your hardware by using the testing utility we

supplied. For more detailed information, please refer to Chapter 2 of

the Device Drivers Manual.

You can also find the rich examples on the CD-ROM to speeding up

your programming.