User manual

Step 3: Scroll down the Supported of Devices box to find the device that

you wish to install, then click the Add… button to evoke the

Existing unconfigured PCI-1730 dialog box such as one shown

in Fig. 2-5. The Existing unconfigured PCI-1730 dialog box

lists all the installed devices on your system. Select the device

you want to configure from the list box and press the OK

button. After you have clicked OK, you will see a PCI-1730

Device Setting dialog box such as the one in Fig. 2-6.

Fig. 2-5 The “Device(s) Found” dialog box

Configuring the Device

Step 4: On the PCI-1730 Device Setting dialog box (Fig. 2-6), you can

configure the IDI00, IDI01 and DI00, DI01 Interrupt trigger

mode either as Rising Edge or Falling Edge, and Enable or

Disable the IDI00, IDI01 and DI00, DI01.

Fig. 2-6 The Device Setting dialog box