Datasheet

Industrial I/O
Features
PCIE-1760
Specifications
Isolated Digital Input
Channels 8
Input Voltage Logic 0: 1.0 V max.
Logic 1: 4.5 V min. (12 V max.)
Interruptible Channels 8
Isolation Protection 2,500 V
DC
Opto-Isolator Response 25 μs
Input Resistance 2 kW 1/4 W
Counter/Timer
Channels 8
Resolution 16 bits
Compatibility 5 V/TTL
Max. Input Frequency 500 Hz
Isolation Protection 2,500 V
DC
PWM Channels 2
Digital Noise Filter Min. effective high input period [(2 ~ 65535) x 5 ms]
+ 5 ms
Min. effective low input period [(2 ~ 65535) x 5 ms]
+ 5 ms
Relay Output
Channels 8
Relay Type 2 x Form C, and 6 x Form A
Contact Rating 1 A @ 125 V
AC
, 2 A @ 30 V
DC
Max. Switching Power 125 VA, 60 W
Max. Switching Voltage 250 V
AC
, 220 V
DC
Max. Switching Current 2 A
Operate/Release Time 5 / 3.5 ms max
Resistance Contact: 50 mW max.
Insulation: 100 MW min. @ 500 V
DC
Life Expectancy 3 x 10
5
cycles min.: 2 A @ 30 V
DC
, 1 A @ 125 V
AC
(Electrical) 10
6
cycles min.: 1 A @ 30 V
DC
, 0.5 A @ 125 V
AC
8 opto-isolated digital input channels with counter/timer function
8 relay actuator output channels
2 opto-isolated PWM outputs
LED indicators to show activated relays
Jumper-selectable dry/wet-contact input signals
Up event counters for DI
Programmable digital filter function for DI
Pattern match interrupt function for DI
Change-of-state interrupt function for DI
Board ID switch
8-Ch Relay and 8-Ch Isolated Digital
Input PCI Express Card
General
Bus Type PCI Express V1.0
I/O Connectors 1 x DB37, female
Dimensions (L x H) 168 x 100 mm (6.6" x 3.9")
Power Consumption Typical: 5 V @ 450 mA
Max.: 5 V @ 850 mA
Operating Temperature 0 ~ 60 °C (32 ~ 140 °F)
Storage Temperature -20 ~ 70 °C (-4 ~ 158 °F)
Storage Humidity 5 ~ 95 % RH, non-condensing
Ordering Information
PCIE-1760-AE 8-ch relay/IDI PCIe card w/10-ch counter/timer
Accessories
PCL-10137-1E DB37 cable, 1 m
PCL-10137-2E DB37 cable, 2 m
PCL-10137-3E DB37 cable, 3 m
ADAM-3937-AE DB37 DIN rail wiring board
Introduction
The PCIE-1760 relay actuator and isolated digital input card is a PC add-on card for the PCI Express bus that satisfies the PCI Express (Revision 1.0) standard. PCIE-1760 features
8 opto-isolated digital inputs with up to 2,500 V
DC
isolation protection for collecting digital inputs in noisy environments, 8 relay actuators that can be used as on/off control devices
or small power switches, and 2 isolated PWM (pulse width modulation) outputs for custom applications.
For easy monitoring, each relay is equipped with a single red LED that indicates the on/off status. Each isolated input supports both dry and wet contact to enable easy interfacing
with other devices when no voltage is present in the external circuit.
RoHS
COMPLIANT
2002/95/EC
Last updated: 27-Jun-2018All product specifications are subject to change without notice.

Summary of content (1 pages)