User manual

39 Chapter 5
Step 2:Select the input range of the channel which you want to calibrate.
Step 3:Click the Calibration button to start the calibration process. The
Calibration Wizard window will pop up.
Figure 5.2: Click the Calibration Button to Launch the Calibration
Step 4:Follow the instruction of Calibration Wizard to input a correct
DC voltage as a reference and click the Next button to proceed to the next
step.
Figure 5.3: The Start-up Window of Offset Calibration
Note: Each calibration process can calibrate only one
channel and one input range at a time.