User manual

PCIE-1744 User Manual 16
After the PCIE-1744 is installed, you can verify whether it is properly
installed on your system in Device Manager:
1. Access Device Manager through:
Start /Control Panel /System /Device Manager.
2. The device name of card should be listed on the Device Manager
tab on the System Property Page.
Figure 2.3: The Device Name Listed in the Device Manager
After your card is properly installed on your system, you can now start-
configuration using Device Manager, which was installed on your system
during driver setup. A complete device installation procedure should
include board selection and device setup. The following sections will
guide you through the board selection, device setup and operation of your
device.
Note: If your card is properly installed, you should see the
device name of your card listed on the Device Manager
tab. If you see your device name listed, but marked
with an exclamation sign “!”, it means your card has not
been correctly installed. In this case, remove the card
device from the Device Manager by selecting its device
name and press the Remove button. Then go through
the driver installation process again.