User manual

13 Chapter 2
2.2 Driver Installation
We recommend you to install the driver before you install any of the the
PCIE-1744 into your system, since this will guarantee a smooth installa-
tion process.
The Advantech Device Drivers setup program for the PCIE-1744 is
included on the companion CD-ROM that is shipped with your DA&C
card package. Please follow the steps below to install the driver software:
Step 1: Insert the companion CD-ROM into your CD-ROM drive.
Step 2: The Setup program will be launched automatically if you have the
AUTORUN function enabled on your system. When the Setup program is
launched, you’ll see the following setup screen.
Figure 2.1: The Setup Screen of Advantech Automation Software
Note: If the AUTORUN function is not enabled on your
computer, use Windows Explorer or the Windows
Run command to execute Autorun.exe on the com-
panion CD-ROM.