User manual

33 PCI-7020 User Manual
Chapter 3 Award BIOS Setup
! EPP Mode Select
This field allows you to select EPP port type 1.7 or 1.9. The choices are “EPP1.9”
and “EPP1.7”.
! ECP Mode Use DMA
This selection is available only if you select “ECP” or “ECP + EPP” in the Parallel
Port Mode field. In ECP Mode, you can select DMA channel 1 or DMA channel 3.
Leave this field on the default setting.
! Onboard Serial Port 3 (Optional)
The settings are "CA0", CA8" and “Disabled” for the on-board serial connector 3.
! Series port 3 use IRQ
The settings are "IRQ10", "IRQ11" and "Disabled" for the on-board serial connec-
tor 3.
! Onboard Serial Port 4 (Optional)
The settings are "CA0", CA8" and “Disabled” for the on-board serial connector 4.
! Series port 4 use IRQ
The settings are "IRQ10", "IRQ11" and "Disabled" for the on-board serial connec-
tor 4.
! Onboard Serial Port 5 (Optional)
The settings are "CA0", "CA8" and "Disabled" for the on-board serial connector 5.
! Series port 5 use IRQ
The settings are "IRQ10", "IRQ11" and "Disabled" for the on-board serial connec-
tor 5.
! Onboard Serial Port 6 (Optional)
The settings are "CA0", "CA8" and "Disabled" for the on-board serial connector 6.
! Series port 6 use IRQ
The settings are "IRQ10", "IRQ11" and "Disabled" for the on-board serial connec-
tor 6.