User manual

25 PCI-7020 User Manual
Chapter 3 Award BIOS Setup
3.3 Standard CMOS Setup
! Date
The date format is <week>, <month>, <day>, <year>.
! Time
The time format is <hour> <minute> <second>, based on the 24-hour clock.
! IDE channel 0/1 Master/Slave
– IDE HDD Auto-Detection: Press “Enter” to select this option for automatic
device detection.
– IDE Device Setup:
Auto: Automatically detects IDE devices during POST
None: Select this when no IDE device is used. The system will skip the auto-
detection step to make system start up faster.
Manual: User can manually input the correct settings.
– Access Mode: The options are CHS/LBA/Large/Auto
– Capacity: Capacity of currently installed hard disk.
– Cylinder: Number of cylinders
– Head: Number of heads
– Precomp: Write precomp
– Landing Zone: Landing zone
– Sector: Number of sectors
! Halt On
This category determines whether system start-up will halt or not when an error
is detected during power up.
The options are: No Errors/All Errors/All, But Keyboard/All, But Diskette/All, But
Disk/Key
! Memory
This category displays base memory, extended memory, and total memory
detected during POST (Power On Self Test).
Figure 3.2 Standard CMOS features screen