User manual

PCI-7020 User Manual 10
1.13 Power Model Setting and Installation
PCI-7020 can support AT or ATX power model settings. It can be used with back-
planes and single boards.
Installation as below.
Figure 1.4 ATX power setting of PCI-7020 with backplane
Figure 1.5 ATX power setting of PCI-7020 with single board
ATX Power Supply
With backplane
Please refer to Figure 1.4
1. Use 3 pin ATX signal cable (P/N:1700002343) to connect the ATXF1
on the CPU card with PS-ON (CN1) on the backplane.
2. Use power cable (P/N:1700006196) to connect power supply with
ATX1 connector on the CPU card.
3. Connect the power supply and ATX1 connector on the backplane.
Single board
Please refer to Figure 1.5
1. Remove the jumper on CPU card ATXF1 1-2 pins.
2. Use power cable (P/N:1700000265) to connect the power supply with
the ATX1 connector on the CPU card.