Specifications

Chapter 2
– 9 – PCI-1762 User’s Manual
Advantech Co., Ltd.
www.advantech.com
2.2 Switch and Jumper Settings
The PCI-1762 card has one function switch and two jumper settings.
The following sections tell how to configure the card. You may want to
refer to the figure below for help in identifying card components.
Figure 2-1: Card connector, jumper and switch locations
Table 2-1: Summary of jumper settings
NO
NC
NO
NC
Names of
Jumpers
Function description
JP4 ~ 19
Sets relay output to be normally open (default)
Sets relay output to be normally closed
JP2
Clears relay outputs to OFF when the system (or
PC) issues a reset signal on the PCI bus.
Clears relay outputs to OFF only when system
powers-on.