Datasheet
www.advantech.com/products
Online Download
Features
RoHS
COMPLIANT
2002/95/EC
Specifications
Isolated Digital Input
Channels 16
Input Voltage Logic 0: 3.0 V max.
Logic 1: 10 V min. (50 V max.)
Interrupt Capable Ch. 2 (IDI0,IDI8)
Isolation Protection 2,500 V
DC
Opto-Isolator Response 100 µs
Input Resistance 5.7 k Ohm 1 W
Relay Output
Channels 16
Relay Type Form A or Form B (Jumper selectable)
Contact Rating 0.5 A @ 250 V
AC
, 0.5 A @ 30 V
DC
Max. Switching Power 125 VA, 15 W
Max. Switching Voltage 250 V
AC
, 220 V
DC
Operate Time Typical: 3 ms, Max.: 5 ms
Release Time Typical: 2 ms, Max.: 4 ms
Resistance Contact: 50 m Ohm max.
Life Expectancy 2 x 10
5
cycles min. @ 0.5A/ 250V
AC
Introduction
The PCI-1762 provides 16 opto-isolated digital inputs with isolation protection of 2,500 V
DC
for collecting digital inputs in noisy environments, 16 relay actuators that can be used
as a on/off control devices or small power switches.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
PCI-1762
16 opto-isolated digital input channels
16 relay actuator output channels
LED indicators to show activated relays
Jumper selectable dry contact/wet contact input signals
BoardID switch
16-ch Relay and 16-ch Isolated
Digital Input PCI Card
General
I/O Connectors 1 x DB62 female connector
Dimensions (L x H) 175 x 100 mm (6.9" x 3.9")
Power Consumption Typical: 5 V @ 250 mA
Max.: 5 V @ 620 mA
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
Storage Humidity 5 ~ 95 % RH, non-condensing
Ordering Information
PCI-1762 16-ch Relay and 16-ch Isolated Digital Input PCI Card
Accessories
PCL-10162-1E DB62 Cable, 1 m
PCL-10162-3E DB62 Cable, 3 m
ADAM-3962 DB62 DIN-rail Wiring Board
All product specifications are subject to change without notice Last updated : 6-Mar-2015