User manual

PCI-1752 User Manual 10
Step 3: Click Continue, and select the Installation option.
Step 4: Select the specific device and then just follow the installation
instructions step by step to complete your device driver installation and
setup.
For further information on driver-related issues, an online version of the
Device Drivers Manual is available by accessing the following path:
Start\Programs\Advantech Automation \Advantech Device Man-
ager\Device Driver’s Manual.
2.3 Hardware Installation
After the DLL driver installation is completed, you can now go on to
install the PCI-1752U/PCI-1752USO card in any PCI slot on your com-
puter. But it is suggested that you should refer to the computer user man-
ual or related documentations if you have any doubt. Please follow the
steps below to install the card on your system.
Step 1: Turn off your computer and unplug the power cord and cables.
TURN OFF your computer before installing or removing any com-
ponents on the computer.
Step 2: Remove the cover of your computer.
Step 3: Remove the slot cover on the back panel of your computer.
Step 4: Touch the metal part on the surface of your computer to neutralize
the static electricity that might be on your body.
Step 5: Adjust DIP switch SW1 on board to set the card’s board ID.
Note: If the autoplay function is not enabled on your
computer, use Windows Explorer or Windows
Run command to execute AUTO-
RUN.EXE on the companion CD-ROM.
Note: Make sure you have installed the driver first
before you install the card (please refer to Sec-
tion 2.2 Driver Installation)