User manual

5 Chapter 1
1.2 Installation Guide
Before you install your PCI-1752U/ USO card, please make sure you
have the following necessary components:
 PCI-1752U/PCI-1752USO Isolated digital output card
 PCI-1752U/PCI-1752USO User’s Manual
 Driver software Advantech DLL drivers (included in CD-ROM)
 Wiring cable PCL-10250
 Wiring board ADAM-3951/ADAM-3951B
 Computer PC or workstation with PCI-bus slot (Win XP/2000)
After you get the necessary components and maybe some accessories for
enhanced operation for your DAS card, you can then begin the Installa-
tion procedures. Figure 1-1 on the next page provides a concise flow
chart to give users a broad picture of the software and hardware installa-
tion procedures:
1.3 Accessories
Advantech offers a complete set of accessory products to support the PCI-
1752U/PCI-1752USO cards. These accessories include:
Wiring Cable
 PCL-10250 The PCL-10250 shielded cable is specially designed
for PCI-1752U/PCI-1752USO card to provide high resistance to noise.
To achieve a better signal quality, the signal wires are twisted in such a
way as to form a “twisted-pair cable”, reducing crosstalk and noise from
other signal sources.
Wiring Boards
 ADAM-3951/ADAM-3951B The ADAM-3951/ADAM-3951B
is a 50-pin SCSI wiring terminal module with LED indicators for DIN-
rail mounting. This terminal module can be readily connected to the
Advantech PC-Lab cards and allow easy yet reliable access to individual
pin connections for the PCI-1752U/PCI-1752USO card. (ADAM-3951
can be used with PCI-1752U while ADAM-3951B can be used with both
PCI-1752U and PCI-1752USO)