User manual

PCI-1736UP User Manual 18
2.4.2 Configuring the Device
4. On the PCI-1736UP Device Setting dialog box (Fig. 2-6), you can
configure the IDI00, IDI01 and DI00, DI01 Interrupt trigger mode
either as Rising Edge or Falling Edge, and Enable or Disable the
IDI00, IDI01 and DI00, DI01.
Figure 2.6: The Device Setting Dialog Box
5. After you have finished configuring the device, click OK and the
device name will appear in the Installed Devices box as seen
below:
Figure 2.7: The Device Name Appearing on the List of Devices Box