Specifications

Comedi
125 / 148
The ACL-7130 card have an 8254 timer/counter not supported by this driver.
5.5.84 pcl812 -- Advantech PCL-812/PG, PCL-813/B, ADLink ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-
821PGH/PGL/PGL-NDA, A-822PGH/PGL, A-823PGH/PGL, A-826PG, ICP DAS ISO-813
Author: Michal Dobes <[e-mail]>
Status: works (I hope. My board fire up under my hands and I cann’t test all features.)
Manufacturer Device Name
Advantech PCL-812 pcl812
Advantech PCL-812PG pcl812pg
Advantech PCL-813 pcl813
Advantech PCL-813B pcl813b
ADLink ACL-8112DG acl8112dg
ADLink ACL-8112HG acl8112hg
ADLink ACL-8113 acl-8113
ADLink ACL-8216 acl8216
ICP ISO-813 iso813
ICP A-821PGH a821pgh
ICP A-821PGL a821pgl
ICP A-821PGL-NDA a821pclnda
ICP A-822PGH a822pgh
ICP A-822PGL a822pgl
ICP A-823PGH a823pgh
ICP A-823PGL a823pgl
ICP A-826PG a826pg
This driver supports insn and cmd interfaces. Some boards support only insn
becouse their hardware don’t allow more (PCL-813/B, ACL-8113, ISO-813).
Data transfer over DMA is supported only when you measure only one
channel, this is too hardware limitation of these boards.
Options for PCL-812:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
[2] - DMA (0=disable, 1, 3)
[3] - 0=trigger source is internal 8253 with 2MHz clock
1=trigger source is external
[4] - 0=A/D input range is +/-10V
1=A/D input range is +/-5V
2=A/D input range is +/-2.5V
3=A/D input range is +/-1.25V
4=A/D input range is +/-0.625V
5=A/D input range is +/-0.3125V
[5] - 0=D/A outputs 0-5V (internal reference -5V)
1=D/A outputs 0-10V (internal reference -10V)
2=D/A outputs unknow (external reference)
Options for PCL-812PG, ACL-8112PG:
[0] - IO Base
[1] - IRQ (0=disable, 2, 3, 4, 5, 6, 7; 10, 11, 12, 14, 15)
[2] - DMA (0=disable, 1, 3)