Specifications
Comedi
121 / 148
Manufacturer Device Name
National Instruments PCI-6224 ni_pcimio
National Instruments PXI-6224 ni_pcimio
National Instruments PCI-6225 ni_pcimio
National Instruments PXI-6225 ni_pcimio
National Instruments PCI-6229 ni_pcimio
National Instruments PCI-6250 ni_pcimio
National Instruments PCI-6251 ni_pcimio
National Instruments PCIe-6251 ni_pcimio
National Instruments PXIe-6251 ni_pcimio
National Instruments PCI-6254 ni_pcimio
National Instruments PCI-6259 ni_pcimio
National Instruments PCIe-6259 ni_pcimio
National Instruments PCI-6280 ni_pcimio
National Instruments PCI-6281 ni_pcimio
National Instruments PXI-6281 ni_pcimio
National Instruments PCI-6284 ni_pcimio
National Instruments PCI-6289 ni_pcimio
National Instruments PCI-6711 ni_pcimio
National Instruments PXI-6711 ni_pcimio
National Instruments PCI-6713 ni_pcimio
National Instruments PXI-6713 ni_pcimio
National Instruments PXI-6071E ni_pcimio
National Instruments PCI-6070E ni_pcimio
National Instruments PXI-6070E ni_pcimio
National Instruments PXI-6052E ni_pcimio
National Instruments PCI-6036E ni_pcimio
National Instruments PCI-6731 ni_pcimio
National Instruments PCI-6733 ni_pcimio
National Instruments PXI-6733 ni_pcimio
National Instruments PCI-6143 ni_pcimio
National Instruments PXI-6143 ni_pcimio
These boards are almost identical to the AT-MIO E series, except that
they use the PCI bus instead of ISA (i.e., AT). See the notes for
the ni_atmio.o driver for additional information about these boards.
Autocalibration is supported on many of the devices, using the
comedi_calibrate (or comedi_soft_calibrate for m-series) utility.
M-Series boards do analog input and analog output calibration entirely
in software. The software calibration corrects
the analog input for offset, gain and
nonlinearity. The analog outputs are corrected for offset and gain.
See the comedilib documentation on comedi_get_softcal_converter() for
more information.
By default, the driver uses DMA to transfer analog input data to
memory. When DMA is enabled, not all triggering features are
supported.
Digital I/O may not work on 673x.
Note that the PCI-6143 is a simultaineous sampling device with 8 convertors.
With this board all of the convertors perform one simultaineous sample during
a scan interval. The period for a scan is used for the convert time in a
Comedi cmd. The convert trigger source is normally set to TRIG_NOW by default.