Specifications

Comedi
110 / 148
The DSP on the board requires initialization code, which can
be loaded by placing it in /lib/firmware/comedi.
The initialization code should be somewhere on the media you got
with your card. One version is available from http://www.comedi.org
in the comedi_nonfree_firmware tarball.
Configuration options:
[0] - PCI bus number - if bus number and slot number are 0,
then driver search for first unused card
[1] - PCI slot number
5.5.56 ke_counter -- Driver for Kolter Electronic Counter Card
Author: Michael Hillmann
Status: tested
Manufacturer Device Name
Kolter Electronic PCI Counter Card ke_counter
Configuration Options:
[0] - PCI bus of device (optional)
[1] - PCI slot of device (optional)
If bus/slot is not specified, the first supported
PCI device found will be used.
This driver is a simple driver to read the counter values from
Kolter Electronic PCI Counter Card.
5.5.57 me4000 -- Meilhaus ME-4000 series boards
Author: gg (Guenter Gebhardt <[e-mail]>)
Status: broken (no support for loading firmware)
Manufacturer Device Name
Meilhaus ME-4650 me4000
Meilhaus ME-4670i me4000
Meilhaus ME-4680 me4000
Meilhaus ME-4680i me4000
Meilhaus ME-4680is me4000
- Analog Input