Specifications

Comedi
106 / 148
Manufacturer Device Name
Data Translation DT2817 dt2817
A very simple digital I/O card. Four banks of 8 lines, each bank
is configurable for input or output. One wonders why it takes a
50 page manual to describe this thing.
The driver (which, btw, is much less than 50 pages) has 1 subdevice
with 32 channels, configurable in groups of 8.
Configuration options:
[0] - I/O port base base address
5.5.48 dt282x -- Data Translation DT2821 series (including DT-EZ)
Author: ds
Status: complete
Manufacturer Device Name
Data Translation DT2821 dt2821
Data Translation DT2821-F-16SE dt2821-f
Data Translation DT2821-F-8DI dt2821-f
Data Translation DT2821-G-16SE dt2821-f
Data Translation DT2821-G-8DI dt2821-g
Data Translation DT2823 dt2823
Data Translation DT2824-PGH dt2824-pgh
Data Translation DT2824-PGL dt2824-pgl
Data Translation DT2825 dt2825
Data Translation DT2827 dt2827
Data Translation DT2828 dt2828
Data Translation DT21-EZ dt21-ez
Data Translation DT23-EZ dt23-ez
Data Translation DT24-EZ dt24-ez
Data Translation DT24-EZ-PGL dt24-ez-pgl
Configuration options:
[0] - I/O port base address
[1] - IRQ
[2] - DMA 1
[3] - DMA 2
[4] - AI jumpered for 0=single ended, 1=differential
[5] - AI jumpered for 0=straight binary, 1=2’s complement
[6] - AO 0 jumpered for 0=straight binary, 1=2’s complement
[7] - AO 1 jumpered for 0=straight binary, 1=2’s complement
[8] - AI jumpered for 0=[-10,10]V, 1=[0,10], 2=[-5,5], 3=[0,5]
[9] - AO 0 jumpered for 0=[-10,10]V, 1=[0,10], 2=[-5,5], 3=[0,5],
4=[-2.5,2.5]
[10]- A0 1 jumpered for 0=[-10,10]V, 1=[0,10], 2=[-5,5], 3=[0,5],
4=[-2.5,2.5]