Specifications

Comedi
102 / 148
[1] - IRQ (optional, required for timed or externally triggered conversions)
All entries in the channel/gain list must use the same gain and be
consecutive channels counting upwards in channel number (these are
hardware limitations.)
I’ve never tested the gain setting stuff since I only have a
DAS-800 board with fixed gain.
The cio-das802/16 does not have a fifo-empty status bit! Therefore
only fifo-half-full transfers are possible with this card.
5.5.42 dmm32at -- Diamond Systems mm32at driver.
Author: Perry J. Piplani <[e-mail]>
Status: experimental
This driver is for the Diamond Systems MM-32-AT board
Configuration Options:
comedi_config /dev/comedi0 dmm32at baseaddr,irq
5.5.43 dt2801 -- Data Translation DT2801 series and DT01-EZ
Author: ds
Status: works
Manufacturer Device Name
Data Translation DT2801 dt2801
Data Translation DT2801-A dt2801
Data Translation DT2801/5716A dt2801
Data Translation DT2805 dt2801
Data Translation DT2805/5716A dt2801
Data Translation DT2808 dt2801
Data Translation DT2818 dt2801
Data Translation DT2809 dt2801
Data Translation DT01-EZ dt2801
This driver can autoprobe the type of board.
Configuration options:
[0] - I/O port base address
[1] - unused
[2] - A/D reference 0=differential, 1=single-ended