Specifications

Comedi
92 / 148
Manufacturer Device Name
Measurement Computing PCI-DAS1602/16 cb_pcidas
Measurement Computing PCI-DAS1602/16jr cb_pcidas
Measurement Computing PCI-DAS1602/12 cb_pcidas
Measurement Computing PCI-DAS1200 cb_pcidas
Measurement Computing PCI-DAS1200jr cb_pcidas
Measurement Computing PCI-DAS1000 cb_pcidas
Measurement Computing PCI-DAS1001 cb_pcidas
Measurement Computing PCI_DAS1002 cb_pcidas
The boards may be autocalibrated using the comedi_calibrate
utility.
Configuration options:
[0] - PCI bus of device (optional)
[1] - PCI slot of device (optional)
If bus/slot is not specified, the first supported
PCI device found will be used.
For commands, the scanned channels must be consecutive
(i.e. 4-5-6-7, 2-3-4,...), and must all have the same
range and aref.
AI Triggering:
For start_src == TRIG_EXT, the A/D EXTERNAL TRIGGER IN (pin 45) is used.
For 1602 series, the start_arg is interpreted as follows:
start_arg == 0 => gated triger (level high)
start_arg == CR_INVERT => gated triger (level low)
start_arg == CR_EDGE => Rising edge
start_arg == CR_EDGE | CR_INVERT => Falling edge
For the other boards the trigger will be done on rising edge
5.5.25 cb_pcidda -- MeasurementComputing PCI-DDA series
Author: Ivan Martinez <[e-mail]>, Frank Mori Hess <[e-mail]>
Status: Supports 08/16, 04/16, 02/16, 08/12, 04/12, and 02/12
Manufacturer Device Name
Measurement Computing PCI-DDA08/12 cb_pcidda
Measurement Computing PCI-DDA04/12 cb_pcidda
Measurement Computing PCI-DDA02/12 cb_pcidda
Measurement Computing PCI-DDA08/16 cb_pcidda
Measurement Computing PCI-DDA04/16 cb_pcidda
Measurement Computing PCI-DDA02/16 cb_pcidda
Configuration options:
[0] - PCI bus of device (optional)
[1] - PCI slot of device (optional)