Specifications

Comedi
91 / 148
Manufacturer Device Name
Measurement Computing PCI-DAS64/M1/16 cb_pcidas64
Measurement Computing PCI-DAS64/M2/16 cb_pcidas64
Measurement Computing PCI-DAS64/M3/16 cb_pcidas64
Measurement Computing PCI-DAS6402/16/JR cb_pcidas64
Measurement Computing PCI-DAS64/M1/16/JR cb_pcidas64
Measurement Computing PCI-DAS64/M2/16/JR cb_pcidas64
Measurement Computing PCI-DAS64/M3/16/JR cb_pcidas64
Measurement Computing PCI-DAS64/M1/14 cb_pcidas64
Measurement Computing PCI-DAS64/M2/14 cb_pcidas64
Measurement Computing PCI-DAS64/M3/14 cb_pcidas64
Measurement Computing PCI-DAS6013 cb_pcidas64
Measurement Computing PCI-DAS6014 cb_pcidas64
Measurement Computing PCI-DAS6023 cb_pcidas64
Measurement Computing PCI-DAS6025 cb_pcidas64
Measurement Computing PCI-DAS6030 cb_pcidas64
Measurement Computing PCI-DAS6031 cb_pcidas64
Measurement Computing PCI-DAS6032 cb_pcidas64
Measurement Computing PCI-DAS6033 cb_pcidas64
Measurement Computing PCI-DAS6034 cb_pcidas64
Measurement Computing PCI-DAS6035 cb_pcidas64
Measurement Computing PCI-DAS6036 cb_pcidas64
Measurement Computing PCI-DAS6040 cb_pcidas64
Measurement Computing PCI-DAS6052 cb_pcidas64
Measurement Computing PCI-DAS6070 cb_pcidas64
Measurement Computing PCI-DAS6071 cb_pcidas64
Measurement Computing PCI-DAS4020/12 cb_pcidas64
Configuration options:
[0] - PCI bus of device (optional)
[1] - PCI slot of device (optional)
These boards may be autocalibrated with the comedi_calibrate utility.
To select the bnc trigger input on the 4020 (instead of the dio input),
specify a nonzero channel in the chanspec. If you wish to use an external
master clock on the 4020, you may do so by setting the scan_begin_src
to TRIG_OTHER, and using an INSN_CONFIG_TIMER_1 configuration insn
to configure the divisor to use for the external clock.
Some devices are not identified because the PCI device IDs are not yet
known. If you have such a board, please file a bug report at
5.5.24 cb_pcidas -- MeasurementComputing PCI-DAS series with the AMCC S5933 PCI controller
Author: Ivan Martinez <[e-mail]>, Frank Mori Hess <[e-mail]>, Brice Dubost <[e-mail]>
Status: There are many reports of the driver being used with most of the supported cards. Despite no detailed log is maintained,
it can be said that the driver is quite tested and stable.