Specifications

Step 8: Auto-calibration is finished (Fig. D-8)

Figure D-8: D/A Calibration is finished

D/A channel Manual-Calibration

Step 1: Click the Manual D/A Calibration tab to show the D/A channel

manual calibration panel. Eight D/A channels are individually

calibrated . Before calibrating, output desired voltage from the

D/A channels and measure it through an external precision

multi-meter.

Step 2: For example, choose channel 0; select the Range and select the

wished output voltage code or value from the radio buttons (Fig.

D-9).

Figure D-9: Selecting D/A Range