Specifications

Features
Plug-in I/O Cards
10-42
Specifications
Analog Output
Channels 6
Resolution
12 bits, double buffered
Output Rate
Static update
Reference Clock
Internal:
External Clock Frequency:
External Voltage Range:
Output Range
(Software programmable)
Internal Reference
Bipolar (V)
+/-5, +/-10
Unipolar (V)
0 ~ 5, 0 ~ 10
Current Loop (mA)
4 ~ 20
Slew Rate
0.3 V/µs
Driving Capability
±5 mA max.
Output Impedance
0.1 Ω
Operation Modes
Software polling
Accuracy
Relative: ±0.012% full scale range
Differential Linearity: ±½ bit
Current Loop Excitation
Minimum +8 V, maximum +36 V for 4 ~ 20 Voltage mA
Voltage current loop
Digital Input (PCL-726)
Channels 16
Compatibility
5 V/TTL
Input Voltage
Logic 0: 0.8 V max.
Logic 1: 2.0 V min.
Digital Output (PCL-726)
Channels 16
Compatibility
5 V/TTL
Output Voltage Logic 0: 0.5 V, Logic 1: 2.4 V
Output Capability
Sink: 0.5 V @ 0.4 mA max.
Source: 2.7 V @ 50 mA max.


















PCL-726
PCL-728
6-ch Analog Output Card with Digital I/O
2-ch Isolated Analog Output Card
Independent analog output channels
12-bit resolution double-buffered D/A converter
Multiple voltage ranges: ±10 V, ±5 V, 0 ~ +5 V, 0 ~ +10 V and 4 ~ 20 mA
current loop (sink)
16 digital input and 16 digital output channels (PCL-726)
Two DB9 connectors for easy wiring (PCL-728)





General
Bus Type ISA
I/O Connectors 4 x 20-pin male ribbon cable connectors
PCL-728: 2 x DB9 connectors
Dimensions (L x H)
PCL-726: 340 x 100 mm (13.4" x 3.9")
PCL-728: 184 x 119 mm (7.25" x 4.7")
Power Consumption
PCI-726: +5 V @ 500 mA typical, 1 A max.
+12 V @ 80 mA typical, 110 mA max.
-12 V @ 60 mA typical, 90 mA max.
PCL-728: +5V @ 800 mA max.
Operating Temperature
0 ~ 50° C (32 ~ 122° F)
Storing Temperature
0 ~ 65° C (32 ~ 149° F)
Operating Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
PCL-726 6-ch analog output card with digital I/O, user manual
and driver CD-ROM (cable not included)
PCL-728
Isolated 2-ch analog output card, user manual and
driver CD-ROM (cable not included)
PCL-10120-1
20-pin flat cable, 1 m
PCL-10120-2
20-pin flat cable, 2 m
PCLD-780
Screw terminal board
PCLD-782
Opto-Isolated D/I board (16-ch)
PCLD-785
Relay output board (16-ch)
PCLD-880
Universal screw terminal board
ADAM-3909
DB9 wiring terminal for DIN-rail mounting
ADAM-3920
20-pin wiring terminal for DIN-rail mounting

















Introduction
PCL-726, and PCL-728 are analog output cards with 12-bit analog output channels. You can individually configure each channel to any of the following ranges: 0 to +5 V, 0 to +10
V, ±5 V, ±10 V and 4 to 20 mA current loop (sink). Designed for use in industrial environments, these cards are ideal, economical solutions for applications that require multiple
analog outputs or current loops.
PCL-726
PCL-728
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com