Specifications

Features
Plug-in I/O Cards
10-32
Specifications
Analog Input
Channels 32 single-ended/16 differential (SW programmable)
Resolution
12 bits
Max. Sampling Rate
100 kS/s
FIFO Size
4096 samples
Overvoltage Protection
±30 V
Isolation Protection
2,500 V
DC
Input Impedance 1 G
Sampling Modes
Software, onboard programmable pacer or external
(TTL level)
Input Range (V, software programmable)
Unipolar
- 0 ~10 0 ~ 5 0 ~ 2.5 0~1.25
Bipolar
±10 ±5 ±2.5 ±1.25 ±0.625
Accuracy (% of FSR ±1LSB)
0.01 0.01 0.02 0.02 0.04
General
Bus Type PCI V2.2
I/O Connector
37-pin D-type female
Dimensions (L x H)
175 x 100 mm (6.9" x 3.9")
Power Consumption
Typical: +5 V @ 850 mA
Max: +5 V @ 1.0 A
Operating Temperature
0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2)
Storing Temperature
-20 ~ 70° C (-4 ~ 158° F)
Storing Humidity
5 ~ 95% RH non-condensing (refer to IEC 68-2-3)
Programmasle Pa
Timer 32-bit programmable timer
Timer Base 10 MHz
PCI-1713
32 single-ended, 16 differential or a combination of analog inputs
12-bit A/D converter, with up to 100 kHz sampling rate
Programmable gain
Onboard FIFO memory (4096 samples)
Isolation protection (2500 V
DC
)
S/W, internal or external pacer sampling modes supported
100 kS/s, 12-bit, 32-ch, Isolated
Analog Input Card
Ordering Information
PCI-1713 100 kS/s, 12-bit, 32-channel Isolated Analog Input
Card, user’s manual and driver CD-ROM. (cable not
included)
PCLD-881B
Industrial Wiring Terminal Board (cable not included)
ADAM-3937
Wiring Terminal Board
PCL-10137-1
DB37 cable assembly, 1 m
PCL-10137-2
DB37 cable assembly, 2 m
PCL-10137-3
DB37 cable assembly, 3 m
Introduction
The PCI-1713 is an isolated high-speed analog input card for the PCI bus. It provides 32 analog input channels with a sampling rate up to 100 kS/s, 12-bit resolution and isolation
protection of 2500 V
DC
.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com