Specifications
Features
www.advantech.com/products
Online Download
10-29
8
5
44
10
CompactPCI
9
Plug-in I/O
8
AWS
7
FPM
6
IPPC
TPC
RS-485 I/O
3
UNO
2
BAS
1
PAC & Software
11
Signal Conditioning
12
USB I/O
13
Motion Control I/O
14
Ethernet Switch
15
EDG
16
ICOM
17
Ethernet I/O
Specifications
Analog Input
Channels 16 single-ended
Resolution
12 bits
Max. Sampling Rate
30 kS/s
FIFO Size
0
Overvoltage Protection
±30 V
DC
Input Impedance >10 MΩ
Sampling Modes
Software, pacer or external trigger
Input Range (V, software programmable)
±10, ±5, ±2.5, ±1.25, ±0.625, ±0.3125
Accuracy
0.01% of reading ±1 LSB
Analog Output
Channels 2 double-buffered
Resolution
12 bits
Output Rate
Software polling
Output Range (V, software programmable)
Internal Reference Unipolar
0 ~ 5, 0 ~ 10
External Reference
±10 max.
Driving Capability
10 mA max.
Digital Input
Channels 16
Compatibility
5 V/TTL
Input Voltage
Logic 0: 0.8 V
Logic 1: 2.0 V
30 kS/s, 12-bit, ISA-bus Multifunction CardPCL-812PG
16 single-ended analog inputs
12-bit A/D converter, with up to 30 kHz sampling rate
Programmable gain
Two 12-bit analog output channels
16 digital inputs and 16 digital outputs
Onboard programmable counter
A/D with DMA or interrupt
Digital Output
Channels 16
Compatibility
5 V/TTL
Output Voltage
Logic 0: 0.5 V max., Logic 1: 2.4 V min.
Output Capacity
Sink: 8.0 mA, Source: 0.4 mA
Counter/Timer
Channels 1
Resolution
16 bits
Compatibility
5 V/TTL
Max. Input Frequency
500 kHz
Reference Clock
Internal: 2 MHz
External Frequency: 10 MHz
External Voltage Range: 5V/TTL
General
Bus Type ISA
I/O Connectors
Box header 20P x 2
Dimensions (L x H)
185 x 100 mm (7.3" x 3.9")
Power Consumption
+5 V @ 500 mA typical, 1.0 A max.
+12 V @ 50 mA typical, 100 mA max.
Operating Temperature
0 ~ 50° C (32 ~ 122° F)
Storing Temperature
-20 ~ 65° C (-4 ~ 149° F)
Storing Humidity
5 ~ 95% RH, non-condensing (refer to IEC 68-2-3)
Ordering Information
PCL-812PG 30 kS/s, 12-bit, multifunction card
PCL-10120-1
20-pin flat cable, 1 m
PCL-10120-2
20-pin flat cable, 2 m
PCLD-780
Screw terminal board
Introduction
PCL-812PG is a multifunction analog and digital I/O card that features the five most desired measurement and control functions for PC/AT and compatible systems: A/D conversion,
D/A conversion, digital input, digital output and counter/timer. This half-size card neatly packages 16 12-bit analog input channels, two 12-bit analog output channels, 16 digital
input channels, 16 digital output channels and a programmable counter/timer.
In addition to all the features listed above, PCL-812PG offers the convenience of programmable analog input ranges, where the analog input range can be switched by software
commands instead of DIP switches. PCL-812PG also delivers convenience and maximum resolution for applications that need different gains for different channels or different gains
for different stages of a process. Comprehensive software support, numerous I/O options and a wide range of available daughterboards make the PCL-812PG ideal for industrial
applications that require a combination of analog and digital I/O.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com