Specifications

Step 7: Connect appropriate accessories (68-pin cable, wiring

terminals, etc. if necessary) to the PCI card.

Step 8: Replace the cover of your computer chassis. Re-connect the

cables you removed in step 2.

Step 9: Plug in the power cord and turn on the computer .

Note:

. In case you installed the card without installing the DLL driver first,

Windows 95/98 will recognize your card as an “unknown device” after

rebooting, and will prompt you to provide the necessary driver. You

should ignore the prompting messages (just click the Cancel button) and

set up the driver according to the steps described in 2.2 Driver

Installation.

After the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/

1716L card is installed, you can verify whether it is properly

installed on your system in the Device Manager:

1. Access the Device Manager through

Star/ Control Panel/ System/ Device Manager.

2. The device name of the PCI-1710/1710L/1710HG/1710HGL/

1711/1711L/1716/1716L should be listed on the Device

Manager.