Specifications

2.3 Hardware Installation

Note:

Make sure you have installed the driver first before you install the card

(please refer to 2.2 Driver Installation)

After the DLL driver installation is completed, you can now go on to

install the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/1716/

1716L card in any PCI slot on your computer. But it is suggested that

you should refer to the computer user manual or related

documentations if you have any doubt. Please follow the steps below

to install the card on your system:

Step 1: Turn off your computer and unplug the power cord and cables.

TURN OFF your computer before installing or removing any

components on the computer.

Step 2: Remove the cover of your computer.

Step 3: Remove the slot cover on the back panel of your computer.

Step 4: Touch the metal part on the surface of your computer to

neutralize the static electricity that might be on your body.

Step 5: Insert the PCI-1710/1710L/1710HG/1710HGL/1711/1711L/

1716/1716L card into a PCI slot. Hold the card only by its

edges and carefully align it with the slot. Insert the card firmly

into place. Use of excessive force must be avoided, otherwise

the card might be damaged.

Step 6: Fasten the bracket of the PCI card on the back panel rail of the

computer with screws.