User`s guide

You can install as many I/O devices as you want. When you have completed your device
installation and setup, there should be a listing reflecting your installation displayed in the I/O
Device Installation dialog box. Once an I/O device installed, you may change its parameters by
either double clicking on its entry in the INSTALLED DEVICES list box, or highlighting and
pressing the Setup button.
Setting up or configuring a device
To Set up or Configure/re-configure each I/O device within the Device Installation program, go
into the SETUP menu, and click on DEVICE. Highlight the previously installed I/O device you
wish to set up, and press the Setup button. This will bring you to a device-specific dialog box that
allows you to configure or re-configure the device.