User`s guide

4.12 PWM
4.12.1 CounterPWMEnable
Enable PWM(Pulse Width Modulation) output operation.
Input:
Data type
Parameter Description
DevHandle The handler id of the device specified by DevNum as
assigned by the LabVIEW program.
Port Enable/Disable port.If bit0 = 1, port0 is enabled. If
bit1 = 1,port1 is enabled.
error in A cluster containing error information, such as the
status, code, and source elements that is passed from
a previous linked VI.
Output:
Data type
Parameter Description
DevHandle The handler id of the device specified by DevNum as
assigned by the LabVIEW program.
error out A cluster containing error information. If error in
indicated an error, the status, code, and source
elements of error out have the same values as the
corresponding elements of error in