User`s guide

5. Move the mouse to the “DeviceOpen” VI and click on the mouse left button to invoke the
“Create Constant” function. After creating a constant, a number will appear at the left of
“DeviceOpen” VI block.
6. Execute the Advantech device installation utility (within Advantech DLL driver) from the
Windows environment to check with the device number of Advantech DEMO I/O virtual demo
board. For example, the device number of Advantech DEMO I/O in the screen shown below is
001.
7. Change the value of the constant next to the “DeviceOpen” VI to be 1.
8. Add “AIConfig” and “AIVoltageIn” VIs from the Advantech 32-bit LabVIEW driver by
clicking on user defined VIs. The path to get “AIConfig” and “AIVoltageIn” VI is “User
Defined VIs” >> “Advantech” >> “Advance” >> “adSlowAI” >> “AIConfig” and
“AIVoltageIn”.