User manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Configuration
- 2.1 Initial Inspection
- 2.2 Jumper and Switch Locations
- Figure 2.1: PCI-1601A/B Silk Screen
- Figure 2.2: PCI-1601AU/BU Silk Screen
- Figure 2.3: PCI-1602A/B Silk Screen
- Figure 2.4: PCI-1602AU/BU Silk Screen
- Figure 2.5: PCI-1602UP Silk Screen
- Figure 2.6: PCI-1603 Silk Screen
- Figure 2.7: PCI-1604UP Silk Screen
- Figure 2.8: PCI-1610A/B Silk Screen
- Figure 2.9: PCI-1610CU Silk Screen
- Figure 2.10: PCI-1610AUP/UP Silk Screen
- Figure 2.11: PCI-1610AJP Silk Screen
- Figure 2.12: PCI-1611U Silk Screen
- Figure 2.13: PCI-1612A/B Silk Screen
- Figure 2.14: PCI-1612AU/U Silk Screen
- Figure 2.15: PCI-1612CU Silk Screen
- Figure 2.16: PCI-1620A/B Silk Screen
- Figure 2.17: PCI-1620AU/U Silk Screen
- Figure 2.18: PCI-1622CU Silk Screen
- 2.3 Jumper Settings
- 2.3.1 How to Set Jumpers
- 2.3.2 Default Settings
- 2.3.3 Mode Selection by Jumper/DIP Settings
- Figure 2.21: PCI-1612 Series RS-232/422/485 Selection
- Figure 2.22: RS-422/485 Selection by Jumper Setting
- Figure 2.23: PCI-1603 RS-232 Mode Jumper Setting
- Figure 2.24: PCI-1603 Current-loop Mode Jumper Setting
- Figure 2.25: Active Mode Jumper Setting
- Figure 2.26: Passive Mode Jumper Setting
- Figure 2.27: Resistor Selection
- 2.4 Card Installation
- Chapter 3 Driver Setup & Installation
- Chapter 4 ICOM Tools
- Chapter 5 Pin Assignments and Wiring
PCI-COMMUNICATION User Manual 4
• Speed (bps) :
PCI-1603: RS-232: 50~203.4k
Current Loop: 50~57.6k
Others: 50 ~ 921.6 k
• Data Signals:
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND (for RS-232)
RI (for PCI-1603, PCI-1604UP, PCI-1610A/AJU/B/CU/AUP/UP)
TxD, RxD, RTS, CTS (for RS-422/485)
Tx+, Tx-, Rx+, Rx- (for PCI-1603 Current loop)
Data+, Data-, GND (for PCI-1602UP RS-485)
TxD, RxD, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-, GND (for PCI-
1602UP RS-422)
• Dimensions:
185 x 100 mm (for PCI-1610CU, PCI-1611U, PCI-1612A/B/AU/U/
CU, PCI-1620A/B/AU/U, PCI-1622CU)
123 x 92 mm (for PCI-1601A/AU/B/BU, PCI-1602A/AU/B/BU, PCI-
1603, and PCI-1610A/AJU/B)
119.91x 64.41mm (Low Profile PCI MD1 for PCI-1602UP,
PCI-1604UP and PCI-1610AUP/UP)
• Power Consumption
Model Typical Max
PCI-1601A/AU/B/BU 220 mA (+5V) 270 mA (+5V)
PCI-1602A/AU/B/BU 250 mA (+5V) 300 mA (+5V)
PCI-1602UP - 300 mA (+5V)
PCI-1603 250 mA (+5V) 300 mA (+5V)
PCI-1604UP - 300 mA (+5V)
PCI-1610A/B 60 mA (+12 V) 80 mA (+12 V)
150 mA (+5 V) 180 mA (+5 V)
PCI-1610CU - 750mA(+5V)
PCI-1610AJU/AUP/UP - 400 mA (+5V)
PCI-1611U - 600mA(+5V)
PCI-1612A/B/AU/U 270 mA (+5 V) 338 mA (+5 V)
PCI-1612CU 758 mA (+5V) 803 mA (+5V)
PCI-1620A/B/AU/U 120 mA (+12 V) 150 mA (+12 V)
180 mA (+5 V) 220 mA (+5 V)
PCI-1622CU - 600mA(+5V)