User manual

PCI/ PCI Express-Communication User Manual 36
3.5.2 Configuring a PCI Bridge Device
Double-click the Advantech PCI Bridge device to evoke its Properties page, and then
select the Resources tab on the Properties page to look up or configure the current
configuration of the PCI Bridge device to make sure there are no conflicting devices.
Click other tabs to look up or configure the device.
After you have made necessary changes or if you are satisfied with the default set-
tings, click OK to accept. If you want to cancel the configuration, just click Cancel.
3.5.3 Configuring Ports
The ports will be configured automatically, so you don’t need to do anything.
Note! The Input/Output Range information is helpful to recognize the commu-
nication port attached to the device.