User manual

35 PCI/ PCI Express-Communication User Manual
Chapter 3 Driver Setup & Installation
3. Click the plus sign (+) on the right of the ADSPCIUART device category to
expand it. As shown on the figure below, you can see Advantech PCI/PCIe
UARTs and Advantech PCI Bridge device names listed under the device cate-
gory.
3.5.1 Configuring a PCI UARTs Device
1. Double-click the Advantech PCI/PCIe UARTs device to evoke its Properties
page, and then select the Resource tab on the Properties page to look up or
configure the current settings of the PCI/PCIe UARTs device.
2. After you have made the necessary changes or if you are just satisfied with the
default settings, click OK to accept. If you want to cancel the configuration, click
Cancel.