User manual

43 Chapter 4
Figure 4.5: Mechanical Parameter Definition
Following are introductions of each parameter:
Axis: Defines which axis the parameters will affect.
Max. Speed: The maximum moving speed of the object driven by the
motor. For example, if the motor is driving a table, you can define the
maximum speed here for safety considerations. And the DLL driver will
check every output command to make sure the table does not exceed this
speed.
Mechanical: In this area you can define the parameters of the motor,
encoder, gear box or ball screw. With the parameters, the DLL driver will
be able to translate the physical units into pulse commands. Please refer
to figure 4-5 for details.