User manual

41 Chapter 4
You can start with the operation buttons in the lower-right corner. The
operation flow chart is as follows:
Figure 4.2: Utility Operation Flow Chart
4.2 Select Device
When users press the “Select Device” button, a new dialog box will
popup. In the dialog box, all the installed PCI-1241/1242/1261 cards are
listed, and you can pick one for configuration and operation. If more than
one motion card is installed, you can still identify the cards via the “Card
Index” and descriptions. The Card Index is an index code store in the
card’s firmware, and can be programmed by the “Card Index Manager”.
Figure 4.3: Select Device Dialog Window